Gamut Additional Wireless Battery Powered CCTV Camera - 1080p HD

Product Code: RSWLCAM

Wireless Cameras - Gamut Additional Wireless Battery Powered CCTV Camera - 1080p HD
Gamut battery powered wireless camera diagram
Gamut battery powered wireless camera front view
  • £75.37
  • Save £13.30


Features

  • Additional Camera- Camera ONLY, for use with our wire free CCTV system and recorder
  • Battery Powered CCTV- Camera runs from rechargeable lithium battery, allowing installation on an outside wall without having to run cabling
  • 1080p HD Video- Captures video in 1920x1080p Full HD, with plenty of usable picture detail
  • PIR Sensor- Built-in passive infrared sensor picks up body heat from subjects, triggering recording when it detects movement
  • Long Standby Time- Low power PIR detection allows camera to remain on standby for up to 6 months on a single charge
  • Night Vision- Infra Red LEDs provide 8m of night vision illumination, providing 24/7 security
  • Two Way Audio- Integrated speaker lets you talk back to nearby subjects through your phone
  • IP66 Rated- Heavy duty housing protects camera from the elements, allowing outdoor installation
  • Quick Battery Access- Battery slot is built into the camera base, allowing easy removal without having to take the camera down from the wall

Description

Cut the cord to your CCTV! This additional camera for our Gamut battery powered CCTV system is completely wire-free, allowing you to install it outside your home without needing to run a cable through an exterior wall. This makes it perfect for DIY installers, or for use in a rented property.

The camera features a built-in PIR sensor, which uses a subject's body heat to trigger motion detection. This also allows the camera to enter a low-power standby mode, monitoring your property for up to 6 months on a single charge! Footage is recorded in crisp 1920x1080 Full HD, ensuring plenty of picture detail, with IR LEDs also providing 8m of night vision illumination for use after dark. The camera connects to the recorder using low interference wireless transmission, helping ensure a clean signal.

What's in the box?

  • 1x Battery powered wireless camera
  • 1x Wall plate

Technical Specification

Imaging Sensor: 1/2.7 CMOS
Effective Resolution: 1920x1080
Synch: Internal
Sensitivity: 0.05 lux @f/1.2 (IR off) 0 lux (IR on)
S/N Ratio: 40dB
White Balance: Auto
AES Speed: Auto
AGC: Auto
Noise Reduction: 3D
Audio: Two way audio
Lens: 2.8mm f/1.8
Viewing Angle: 120 degrees (horizontal)
Protection Level: IP66
IR Range: 8m
PIR Angle: 115 degrees
PIR Detection Range: 10m
Battery Capacity: 2900mAh
Battery Life Cycle: Up to 350(t)
Power Input: 4.2V
Power Consumption: 1.8W
Current Consumption: 420mA (active) 400µA
Operational Temperature: -30 to +55c
Operational Humidity: <95%
Dimensions: 136x73x89mm

"

We Also Recommend